1. 參考這裡設定第一個網站:
https://blog.johnwu.cc/article/centos-asp-net-core-neginx.html
注意, 文章中有一個錯誤:
/etc/nginx/conf.d/my-website.conf 的第 27 行, 應該是 include /etc/nginx/conf.d/default_proxy_settings;

2.  因為要避開 5000 port, 所以修改第二個網站的 appsettings.json, 讓第二個網站開在 5002 port, 如下.

{

"Logging": {

    "LogLevel": {

     "Default": "Information",

     "Microsoft": "Warning",

     "Microsoft.Hosting.Lifetime": "Information"

    }

},

"Kestrel": {

        "EndPoints": {

                "Http": {

                        "Url": "http://localhost:5002"

                }

        }

},

"AllowedHosts": "*"

}

3. 新增 /etc/nginx/conf.d/my-website2.conf, 要注意
    A. portal2
    B. server localhost:5002
    C. server_name coretest2.bike.idv.tw
    當然 SSL 憑証的檔名也要記得改.

upstream portal2 {

    # localhost:5000 改成 ASP.NET Core 所監聽的 Port

    server localhost:5002;

}



server {

    # 只要是透過這些 Domain 連 HTTP 80 Port，都會轉送封包到 ASP.NET Core

    listen 80;

    # 可透過空白區分，綁定多個 Domain

    server_name coretest2.bike.idv.tw;

    location / {

        proxy_pass http://portal2/;

        include /etc/nginx/conf.d/default_proxy_settings;

    }

}



# 用 HTTPS 必須要有 SSL 憑證，如果沒有要綁定 SSL 可以把下面整段移除

server {

    # 只要是透過這些 Domain 連 HTTPS 443 Port，都會轉送封包到 ASP.NET Core

    listen 443 ssl;

    server_name coretest2.bike.idv.tw;

    ssl_certificate /etc/nginx/ssl/coretest2.bike.idv.tw.crt;

    ssl_certificate_key /etc/nginx/ssl/coretest2.bike.idv.tw.key;



    location / {

        proxy_pass http://portal2/;

        include /etc/nginx/conf.d/default_proxy_settings;

    }

}

改完後就可以用了.

以下是 https://blog.johnwu.cc/article/centos-asp-net-core-neginx.html 抄過來的一些檔案, 作為備份:

setup-aspnet-core.sh

#!/bin/bash



main() {

    sudo yum -y install epel-release

    sudo yum -y update



    install_nginx

    install_dotnet



    sudo firewall-cmd --add-service=http --permanent

    sudo firewall-cmd --add-service=https --permanent

    sudo firewall-cmd --reload

}



install_nginx() {

    echo "###################################"

    echo "########## Install Nginx ##########"

    echo "###################################"

    sudo yum -y install httpd-tools nginx

    sudo setsebool -P httpd_can_network_connect on

    sudo sed -i 's/^SELINUX=.*/SELINUX=disabled/' /etc/selinux/config

    sudo setenforce 0

    sudo systemctl enable nginx

    sudo systemctl restart nginx

}



install_dotnet() {

    echo "###########################################"

    echo "########## Install .NET Core 2.2 ##########"

    echo "###########################################"

    sudo rpm -Uvh https://packages.microsoft.com/config/rhel/7/packages-microsoft-prod.rpm

    sudo yum -y install aspnetcore-runtime-2.2

}



main "$@"

用以下指令執行:

sudo sh setup-aspnet-core.sh

/etc/systemd/system/my-website.service, (/bin/dotnet 有可能是 /usr/bin/dotnet)

[Unit]

# Description=<此服務的摘要說明>

Description=MyWebsite



[Service]

# WorkingDirectory=<ASP.NET Core 專案目錄>

WorkingDirectory=/usr/share/my-website



# ExecStart=/bin/dotnet <ASP.NET Core 起始 dll>

ExecStart=/bin/dotnet MyWebsite.dll



# 啟動若失敗，就重啟到成功為止

Restart=always

# 重啟的間隔秒數

RestartSec=10



# 設定環境變數，注入給 ASP.NET Core 用

Environment=ASPNETCORE_ENVIRONMENT=Production

Environment=DOTNET_PRINT_TELEMETRY_MESSAGE=false



[Install]

WantedBy=multi-user.target

服務相關指令：

# 開啟，開機自動啟動服務

systemctl enable my-website.service



# 關閉，開機自動啟動服務

systemctl disable my-website.service



# 啟動服務

systemctl start my-website.service



# 重啟服務

systemctl restart my-website.service



# 停止服務

systemctl stop my-website.service



# 查看服務狀態

systemctl status my-website.service

/etc/nginx/conf.d/default_proxy_settings

proxy_http_version 1.1;

proxy_set_header Upgrade $http_upgrade;

proxy_set_header Connection $http_connection;

proxy_set_header Host $host;

proxy_set_header X-Real-IP $remote_addr;

proxy_set_header X-Forwarded-Host $remote_addr;

proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;

proxy_set_header X-Forwarded-Proto $scheme;

proxy_cache_bypass $http_upgrade;

/etc/nginx/conf.d/my-website.conf

upstream portal {

    # localhost:5000 改成 ASP.NET Core 所監聽的 Port

    server localhost:5000;

}



server {

    # 只要是透過這些 Domain 連 HTTP 80 Port，都會轉送封包到 ASP.NET Core

    listen 80;

    # 可透過空白區分，綁定多個 Domain

    server_name demo.johnwu.cc example.johnwu.cc;

    location / {

        proxy_pass http://portal/;

        include /etc/nginx/conf.d/default_proxy_settings;

    }

}



# 用 HTTPS 必須要有 SSL 憑證，如果沒有要綁定 SSL 可以把下面整段移除

server {

    # 只要是透過這些 Domain 連 HTTPS 443 Port，都會轉送封包到 ASP.NET Core

    listen 443 ssl;

    server_name demo.johnwu.cc;

    ssl_certificate /etc/nginx/ssl/demo.johnwu.cc_bundle.crt;

    ssl_certificate_key /etc/nginx/ssl/demo.johnwu.cc.key;



    location / {

        proxy_pass http://portal/;

        include /etc/nginx/conf.d/default_proxy_settings;

    }

}

Nginx 重新啟動:

# 檢查 Nginx 的設定是否有誤

nginx -t



# 若沒有錯誤，即可套用

nginx -s reload

for VS2017: 在 sln 檔的目錄下, 找 .vs\config\applicationhost.config

例如: 
D:\ASP.NET Project\S3_WEB4_NET\.vs\config\applicationhost.config


For VS2019: $(solutionDir)\.vs\{slnName}\config\applicationhost.config
例如:
D:\ASP.NET Project\S3_WEB4_NET\.vs\S3\config\applicationhost.config

use clinic;

INSERT INTO change_notification(`table_name`) VALUES('sys_config');

drop trigger if exists au_sys_config;
drop trigger if exists ai_sys_config;
drop trigger if exists ad_sys_config;

delimiter |

CREATE TRIGGER au_sys_config after UPDATE ON `sys_config`
FOR EACH ROW
BEGIN
DECLARE v_row_count int DEFAULT row_count();
IF v_row_count!=1 THEN
update change_notification set change_count = change_count + 1, update_date = now() where table_name = 'sys_config';
END IF;
END;
|

CREATE TRIGGER ai_sys_config after INSERT ON `sys_config`
FOR EACH ROW
BEGIN
DECLARE v_row_count int DEFAULT row_count();
IF v_row_count!=1 THEN
update change_notification set change_count = change_count + 1, update_date = now() where table_name = 'sys_config';
END IF;
END;
|

CREATE TRIGGER ad_sys_config after Delete ON `sys_config`
FOR EACH ROW
BEGIN
DECLARE v_row_count int DEFAULT row_count();
IF v_row_count!=1 THEN
update change_notification set change_count = change_count + 1, update_date = now() where table_name = 'sys_config';
END IF;
END;
|

delimiter ;

相關參考
https://vuejs.org/v2/guide/

1.
加入vue.js

2.
先"包裹"一層 要用到Vue的元素
個人覺得有點想原本習慣的<!--Content-->
但這次只要放入標籤(我是用Id)
像是範例為 vMain   
然後宣告js 物件 我是取名也叫做 vMain 不知道會不會有撞名問題
所以我的el: 就是 #vMain

3.
再來加入變數
{{Creat_Date}}  兩個括號 桃紅色的
如果data 這個物件裡面有一個叫Creat_Date 的資料他就會被放進去

這樣第一個app 就完成了。

其中 Vue 裡面包含幾樣東西 
el >> 標示 這個Vue 的標籤
data >> 裡面存放的資料變數
created >> 生命週期的
methods>>包含各種功能function

這次的列表頁需要用到以前用的 List Item 跟 Pager
對應到vue 會使用到
v-for for 迴圈
v-for" item in dt  ">> dt 為data中的一個array陣列 (此範例中 為PD 中的 DT)
item 則是在這裡的區域變數

有些要顯示有些要隱藏
v-if
v-if" pager.currentPage  > 1" pager 為data 中的一個物件 裡面有包含 currentPage 的變數

還有要傳ajax 回去要資料
所以要在 vue 中的 methods 建立 function
已這次的例子 getList就是目前的function 可以用到一些 data 裡面的資料
回傳成功之後資料也可以回寫在data上面

以及之前會在各種事件的觸發 
@click 觸發點擊事件
在標籤上加上 @click 可以觸發 類似 onclick 的事件 
但是是調用methods裡面function

日期格式
由於之前的套件PD 回傳的日期資料會是 yyyy-MM-ddTHH:mm:ss 這樣的格式
所以使用了 map  將 dt 裡面的日期 轉換成為我要的格式

v.dt.map(function (obj) {
      var rObj = obj;
      rObj["Create_Date"] = $.datepicker.formatDate('yy-mm-dd', new Date(obj["Create_Date"]));
      return rObj;
});

SELECT e.name, e.protocol_desc, e.type_desc, e.role_desc, e.state_desc, 
       t.port, e.is_encryption_enabled, e.encryption_algorithm_desc, 
       e.connection_auth_desc 
FROM   sys.database_mirroring_endpoints e JOIN sys.tcp_endpoints t
ON     e.endpoint_id = t.endpoint_id;


--這個步驟要看前一步驟出現的 Name , 修改 'DBMirroringEndPoint'
IF  EXISTS (SELECT * FROM sys.endpoints e WHERE e.name = N'DBMirroringEndPoint')
DROP ENDPOINT  DBMirroringEndPoint; 

IF NOT EXISTS (SELECT * FROM sys.endpoints e WHERE e.name = N'DBMirroringEndPoint') 
CREATE ENDPOINT DBMirroringEndPoint
    STATE = STARTED
    AS TCP ( LISTENER_PORT = 5023 )
    FOR DATABASE_MIRRORING (
       AUTHENTICATION = WINDOWS NEGOTIATE,
       ENCRYPTION = REQUIRED,
       ROLE=ALL);

修改完畢, 在做 Security 設定時會看到新的 port "5023"

 

https://stackoverflow.com/questions/628565/display-lines-number-in-stack-trace-for-net-assembly-in-release-mode/628590#628590

1. Go into the Properties window for the project where you want to see stack trace line numbers.
2. Click on the Build "vertical tab".
3. Select "Release" configuration. Check the DEBUG constant parameter.
4. Uncheck the "Optimize code" parameter to avoid the occasional trace issue with inlined code (this step is not essential).
5. Press the Advanced... button and choose Output -> Debug Info -> pdb-only.
6. Deploy the generated .pdb file with the assembly.

 
 
 

我想大家一定會遇到要把資料匯出成 Excel 的需求. 以現有的工具, 大家想到作法大概都是先把資料放到一個 datatable 之中, 後叫用 UW.ExcelPOI.DTToExcelAndWriteToClient 就結束了.

前兩天遇到一個需求, 輸出的 Excel 要加上表頭, 如下圖



於是乎把  UW.ExcelPOI.DTToExcelAndWriteToClient 做了一些擴充, (其實應該說是幫 DTToWorkSheet 做了擴充), 過程如下.

1. 需求: 一個可以快速填入欄位的 Sub (method or function)
A. 每一個 Cell 可以設定內容(文字), 字型大小, 跨欄數, 對齊方式. (其它的未來再來擴充, 例如顔色).
B. 每一個 Row 由 Cell 組成, 由左到右.
C. 一次可以填多個 Row

2. 實作:
A. 先定義 Cell

    Public Class Cell

        Public Content As String

        Public Colspan As Int32 = 1

        Public Alignment As NPOI.SS.UserModel.HorizontalAlignment

        Public FontHeightInPoints As Int32 = 0



        Sub New(Content As String, Optional Colspan As Int32 = 1,

                Optional Alignment As NPOI.SS.UserModel.HorizontalAlignment = NPOI.SS.UserModel.HorizontalAlignment.General,

                Optional FontHeightInPoints As Int32 = 0)

            Me.Content = Content

            Me.Colspan = Colspan

            Me.Alignment = Alignment

            Me.FontHeightInPoints = FontHeightInPoints

        End Sub

    End Class

B. Row 的格式: 我想最直的覺的就是 List(of Cell) 了吧.

C. 多個 Row 的表示法: List(Of List(Of Cell))

D. 來把 Cell 填入 WorkSheet  吧, 

Public Shared Sub AddRows(WS As HSSFSheet, ltRows As List(Of List(Of Cell)), ByRef StartRow As Int32)

共有三個參數: WS  和 ltRows 應該不用解釋了. 最後一個 StartRow 用來指定插入資料的開始 Row.

E.  完整程式碼: (程式碼不看沒關係, 但要跳到 F. 重點講解哦)

Public Shared Sub AddRows(WS As HSSFSheet, ltRows As List(Of List(Of Cell)), ByRef StartRow As Int32)

        Dim WR As HSSFRow

        If ltRows IsNot Nothing Then

            For Each ltRow As List(Of Cell) In ltRows

                WR = WS.CreateRow(StartRow)

                Dim C As Int32 = 0

                For Each cell As Cell In ltRow

                    Dim ic As NPOI.SS.UserModel.ICell = WR.CreateCell(C)

                    ic.SetCellValue(cell.Content)



                    Dim cs As NPOI.SS.UserModel.ICellStyle = WS.Workbook.CreateCellStyle()

                    cs.Alignment = cell.Alignment

                    If cell.FontHeightInPoints > 0 Then

                        Dim oFont As NPOI.SS.UserModel.IFont = WS.Workbook.CreateFont()

                        oFont.FontHeightInPoints = cell.FontHeightInPoints

                        cs.SetFont(oFont)

                    End If



                    ic.CellStyle = cs



                    If cell.Colspan > 1 Then

                        WS.AddMergedRegion(New CellRangeAddress(StartRow, StartRow, C, C + cell.Colspan - 1))

                        C += cell.Colspan - 1

                    End If

                    C += 1

                Next



                StartRow += 1

            Next

        End If

    End Sub

F. 重點講解:
這個 function 在實作時有兩個卡點:
1. 如何合併欄: 

WS.AddMergedRegion(New CellRangeAddress(StartRow, StartRow, C, C + cell.Colspan - 1))

2. 如何設定字型大小和對齊方式:

                    Dim cs As NPOI.SS.UserModel.ICellStyle = WS.Workbook.CreateCellStyle()

                    cs.Alignment = cell.Alignment

                    If cell.FontHeightInPoints > 0 Then

                        Dim oFont As NPOI.SS.UserModel.IFont = WS.Workbook.CreateFont()

                        oFont.FontHeightInPoints = cell.FontHeightInPoints

                        cs.SetFont(oFont)

                    End If



                    ic.CellStyle = cs

這裡有件有有趣的事, 我一開始是這樣寫的.

ic.CellStyle.Alignment = cell.Alignment

結果是整個 WorkSheet 的對齊方式都被改了. 我猜當 WorkSheet 初建立時, CellStyle 都是用同一個. 所以改任一個 cell 的 CellStyle 會同時改到所有 cell 的.

G. 使用方式:

        Dim ltHeader As New List(Of List(Of UW.ExcelPOI.Cell))

        Dim ltLine As New List(Of UW.ExcelPOI.Cell)

        ltLine.Add(New UW.ExcelPOI.Cell(DB.SysConfig.SYSTEM_NAME & "應收明細表", 16,

                                        NPOI.SS.UserModel.HorizontalAlignment.Center, 28))

        ltHeader.Add(ltLine)



        '第二行

        ltLine = New List(Of UW.ExcelPOI.Cell)

        ltLine.Add(New UW.ExcelPOI.Cell("期間: " & Me.txtbl_date_s.Text & " ~ " & Me.txtbl_date_e.Text, 10,

                                        NPOI.SS.UserModel.HorizontalAlignment.Left, 20))

        ltLine.Add(New UW.ExcelPOI.Cell("製表日期: " & Now.ToString("yyyy-MM-dd"), 6,

                                        NPOI.SS.UserModel.HorizontalAlignment.Right, 20))

        ltHeader.Add(ltLine)



        UW.ExcelPOI.DTToExcelAndWriteToClient(newdt, ltHeader:=ltHeader)

由於工作排程往往有數十個甚至百來個 因此需要一個方法能快速備份及移轉到其他 server 的方法
查了一下，好像也只能這樣做

---- 使用指令把全部排程匯出 ----
參考網址
https://msdn.microsoft.com/en-us/library/windows/desktop/bb736357%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396

schtasks /query /XML > all_tasks.xml  
schtasks /query /FO CSV /V >sched_tasks.csv

** xml 比較有用,可以用來匯入到其他server排程，但還要額外處理才能匯入
** csv 只是用來看看目前有哪些排程 可以用來做報表看看
** 這些是全部排程，還要特別處理把 Microsoft 及其他軟體建的排程移除

--------------------------------------------------------------

----如何匯入工作排程到其他 server --------

** 需再寫程式把 all_tasks.xml 拆解成所有排程的單一 xml
   並且生成指令 bat

** 注意 xml 必須是 UTF-16 (unicode) 
   因為 "schtasks /query /XML > all_tasks.xml"產生 xml 是 ansi 

參考網址
https://serverfault.com/questions/325569/how-do-i-import-multiple-tasks-from-a-xml-in-windows-server-2008
** /TN "排程名稱" --- 排程名稱可以是路徑名 
D:\>schtasks.exe /create /TN "\2016JOB\Global\CountryMonthlyStats" /XML "D:\one_task.xml"
** 下面程式碼只是下面程式碼只是參考 還沒實作過
=====================================

var taskXML = new XmlDocument();
taskXML.Load(@"d:\temp\schedtasksBackup.xml");
var batbody = new StringBuilder();

XmlNodeList tasks = taskXML.DocumentElement.GetElementsByTagName("Task");

string strFileName = "d:\\temp\\Task";

for (int i = 0; i < tasks.Count; i++) {
    string onetaskXML = tasks[i].OuterXml;

    //Create the New File. With a little more extra effort
    //you can get the name from a comment above the task -> 應該把註解裡的名稱抓出
    XmlWriter xw = XmlWriter.Create(strFileName + "_" + (i+1) + ".xml");
    batbody.AppendLine(string.Format("schtasks.exe /create /TN \"{0}\" /XML \"{1}\"", "Task " + (i+1) + " Name", strFileName + "_" + (i+1) + ".xml"));

    //Write the XML
    xw.WriteRaw(onetaskXML.ToString());
    xw.Close();

    // Write a bat to import all the tasks
    var batfile = new System.IO.StreamWriter("d:\\temp\\importAllTasks.bat");
    batfile.WriteLine(batbody.ToString());
    batfile.Close();

}
=====================================

#微軟的排程備份真是有夠爛沒有辦法用介面一鍵搞定

今天遇到客戶的 DB  使用空間滿了. 有  "Active Transaction" 

什麼事十日都不能做, 只好刪掉所有的 Session. 使用的 SQL 如下:

SQL 2012
USE [master];

DECLARE @kill varchar(8000) = '';  
SELECT @kill = @kill + 'kill ' + CONVERT(varchar(5), session_id) + ';'  
FROM sys.dm_exec_sessions
WHERE database_id  = db_id('MyDB')

EXEC(@kill);


​
For MS SQL Server 2000, 2005, 2008
USE master;

DECLARE @kill varchar(8000); SET @kill = '';  
SELECT @kill = @kill + 'kill ' + CONVERT(varchar(5), spid) + ';'  
FROM master..sysprocesses  
WHERE dbid = db_id('MyDB')

EXEC(@kill); 

Post 的資料好像會變大, 要改 Web.config

<system.web>

    <httpRuntime requestValidationMode="2.0" maxRequestLength="1024000"/>

</system.web>

程式碼如下:

public string UploadFilesToRemoteUrl(string url, string[] files, NameValueCollection formFields = null)

    {

        string boundary = "----------------------------" + DateTime.Now.Ticks.ToString("x");



        HttpWebRequest request = (HttpWebRequest)WebRequest.Create(url);

        request.ContentType = "multipart/form-data; boundary=" +

                                boundary;

        request.Method = "POST";

        request.KeepAlive = true;



        Stream memStream = new System.IO.MemoryStream();



        var boundarybytes = System.Text.Encoding.ASCII.GetBytes("\r\n--" +

                                                                boundary + "\r\n");

        var endBoundaryBytes = System.Text.Encoding.ASCII.GetBytes("\r\n--" +

                                                                    boundary + "--");





        string formdataTemplate = "\r\n--" + boundary +

                                    "\r\nContent-Disposition: form-data; name=\"{0}\";\r\n\r\n{1}";



        if (formFields != null)

        {

            foreach (string key in formFields.Keys)

            {

                string formitem = string.Format(formdataTemplate, key, formFields[key]);

                byte[] formitembytes = System.Text.Encoding.UTF8.GetBytes(formitem);

                memStream.Write(formitembytes, 0, formitembytes.Length);

            }

        }



        string headerTemplate =

            "Content-Disposition: form-data; name=\"{0}\"; filename=\"{1}\"\r\n" +

            "Content-Type: application/octet-stream\r\n\r\n";



        for (int i = 0; i < files.Length; i++)

        {

            memStream.Write(boundarybytes, 0, boundarybytes.Length);

            var header = string.Format(headerTemplate, "uplTheFile", files[i]);

            var headerbytes = System.Text.Encoding.UTF8.GetBytes(header);



            memStream.Write(headerbytes, 0, headerbytes.Length);



            using (var fileStream = new FileStream(files[i], FileMode.Open, FileAccess.Read))

            {

                var buffer = new byte[1024];

                var bytesRead = 0;

                while ((bytesRead = fileStream.Read(buffer, 0, buffer.Length)) != 0)

                {

                    Response.Write("bytesRead: " + bytesRead.ToString() + "<br>");

                    memStream.Write(buffer, 0, bytesRead);

                }

            }

        }



        memStream.Write(endBoundaryBytes, 0, endBoundaryBytes.Length);

        request.ContentLength = memStream.Length;



        using (Stream requestStream = request.GetRequestStream())

        {

            memStream.Position = 0;

            byte[] tempBuffer = new byte[memStream.Length];

            memStream.Read(tempBuffer, 0, tempBuffer.Length);

            memStream.Close();

            requestStream.Write(tempBuffer, 0, tempBuffer.Length);

        }



        try

        {

            using (var response = request.GetResponse())

            {

                Stream stream2 = response.GetResponseStream();

                StreamReader reader2 = new StreamReader(stream2);

                return reader2.ReadToEnd();

            }

        }

        catch (Exception ex)

        {

            return (ex.ToString());

            throw;

        }

    }